▷▷▷Evolution of Golf Balls
The game of golf has its origins on the east coast of Scotland, where they played in a rather casual with rudimentary equipment. It may seem surprising, but some of the first clubs and golf balls were made from wood. The first written reference (AD1550), golf is one in which John Daly playing with a wooden ball. The golf ball or spring "Feat Herie was introduced 1618th Many pieces of oily skin were sewn securely so that a small opening, the housingIt was finally overthrown. Boiled and softened springs were then filled with trouble when the first end points were. This was in spring ball roundness and finally coated with several layers of paint hammered. The quality of the course varies depending on the skill of the craftsman. These so-called feat Herie were beyond the pockets of the masses (often more expensive club) cheap, because of the difficulty and the time available. However, these ballswere almost four centuries.
The first ball "Gutta" (AD1848) of gutta-percha packing material is made Rev. Dr. Robert Adams Paterson credited. Gutta-percha is the evaporated milk product juice or latex of a tree that was most commonly found in Malaysia. It 'difficult and fragile and it becomes soft and malleable at a temperature of 100 degrees Celsius. Gutta balls were usually handmade by rolling the softened material on a table. The gutta ball comes back to lifethe game of golf in view of its advantages such as lower cost, durability, water resistance and better performance. Despite opposition from traditionalists such as Gutta balls were replaced Heri feat. Later Gutta balls are manufactured (in the corner with a hammer) on their surface with a uniform pattern, because it improves their escape. Later in iron molds or ball presses, ball marks and ball marks created on the imported format. The latest detailed and symmetrical facessignificantly improves the ball flight. The best known are the balls by hand were marked private brands of the Scottish club makers, such as Morris, Robertson, Gourlay, and Auchterlonie.
The revolutionary rubber ball was invented in 1898 by Cleveland, Ohio golfers Coburn Haskell, in association with Bertram Work of the BF Goodrich Company. The ball featured rubber thread wound tightly around a solid rubber core. The balata cover replaced the gutta-percha in the early 1900s. Gradually theaerodynamically superior dimple pattern was adopted 1908th Standardization of weight and size of golf ball was the United States Golf Association on January 1, 1932, 1930 British Golf Association standards set out below. The weight was set at a maximum of 1.620 ounces. And minimum diameter of 1.680 inches are recorded by the development of the speed test, a maximum speed of 250 feet per second from the USGA. The development of better rubber,space-age plastics, silicone and technologically advanced production greatly enhances the precision and durability of golf balls today.
0 comments:
Post a Comment